400-863-9100

IRflex Corporation(美国)

http://www.irflex.com/

地址:
300 Ringgold Industrial Parkway Danville, VA 24540 USA
电话:
434-483-4304
传真:
434-793-9200
产品:
中红外光纤  光纤跳线  Q开关 

公司简介

美国IRflex公司是一家专业的中红外光纤产品制造商。IRflex公司2006年成立,十年来专注于中红外光纤产品和技术的发展,不断创新,形成完备的产品体系,追求为客户提供高质量的解决方案。IRflex产品包括:中红外光纤、光纤跳线、硫化物光纤光开关、中红外光纤合束器、光纤尾纤QCL、光纤束成像器。这些产品被广泛应用于科研、医疗诊断、环境监控、工业监控和国防中。


产品列表

Chalcogenide MWIR Multimode Fiber Combiner

Fiber optic combiners are used to combine two or more fibers into one fused fiber to combine the signals from several sources into one fused fiber, thereby combining their output powers.

Inspired by silica fiber power combiners in near-IR used for power combining for pumping double clad fiber lasers and incoherent beam combining of high power lasers, IRflex’s chalcogenide glass Mid-IR fibers make it possible to extend the power combining capacity beyond 2 µm silica fiber wavelength range.



FC/B® Connector - FC connector at Brewster Angle

Chalcogenide As2S3 and As2Seglass fibers offer a broad transmission range with low propagation loss from 1.5μm to 6.5μm and from 1.5μm to 10μm relatively, with high non-linear coefficient, small and negative index change with temperature (dn/dT), excellent power handling capability, and are chemically stable.

IRF-S Series Chalcogenide Nonlinear Mid-Infrared Fiber

IRflex's nonlinear mid-infrared fiber (IRF), made from extra high purity chalcogenide glass, is specially designed and manufactured to generate and/or guide mid-wave infrared (MWIR) wavelengths (2-10 µm).  They are commercially available.

A suite of patents relating to chalcogenide glass based fiber optics has been licensed to IRflex from the U.S. Naval Research Laboratory (NRL).  These patent, in conjunction with IRflex’s experienced team, enable IRflex to find cutting-edge solutions to nonlinear mid-infrared applications.


Transmission Fiber Cable

IRflex’s mid-infrared transmission cable made from its nonlinear mid-infrared fiber has uses in many military and commercial markets for illumination, detection and bio-chemical sensing. Our mid-infrared transmission cable can be produced for use in long lengths with low attenuation, in order to permit the transmission of laser beams with the greatest power to a remote location.

IRF-Se Series Chalcogenide Nonlinear Longwave Mid-Infrared Fiber

IRflex Corporation is now extending its family of fiber products into longwave mid-infrared spectral region.  IRflex’s IRF-Se Series chalcogenide nonlinear longwave mid-infrared fibers, made from extra high purity chalcogenide glass As2Se3, are specially designed and manufactured to generate and/or guide mid-infrared wavelengths from 1.5 to 10 µm with high transmission efficiency and nonlinearities about 1000 times that of silica glass fiber.

Mid-infrared Fiber-optic Switch for Laser Applications

Leveraging funding from the Office of Naval Research (ONR) IRflex has developed a mid-infrared fiber-optic switch for military applications.  Our unique mid-infrared fiber-optic switch technology routes the multi-band high power laser beam through transmission fiber cables to different locations.  The fiber-optic switch is specifically designed to operate as part of a DIRCM (Directed Infrared Countermeasure) systems within a military tactical aircraft environment. This is a fast, compact and reliable product.

HPLT - LW600 : High-Power Laser Tester for Large window - 600mm Translation

High performance 2-dimension linear motion system for extensive laser testing of large glass windows.  The HPLT-LW600 system is specifically designed to measure Laser Induced Damage Threshold (LIDT) on rugged windows up to 12-inches (30cm) in diameter, and up to 2.5-inches (63.5mm) in thickness with high-power laser up to 2kW. 

The basic system features:



分享到 :