400-863-9100

Amplification Technologies Inc. Sub. of Powersafe Technology Corp(美国)

https://amplificationtechnologies.com

地址:
1203 West St. Georges Ave. Linden, NJ 07036 United States
电话:
+1 908-486-4700
传真:
产品:
放大器  光子计数  金属-半导体-金属光探测器 

公司简介

Amplification Technology developed and offers various photon-detector array configuration as well as single photon-detector. Our photon detectors are based on a unique semiconductor photon detection technology: Discrete Amplification Photon Detector (DAPD). The technology is based on a multi-cell design, where a photo-detector is comprised of many (hundreds) micro-channel cells, so called micro-cells. These micro-cells are electronically grouped together to form the anode of the photodetector.

In addition, monolithic integration of a negative feedback mechanism completed this design, to form the DAPD. The outcome design is one that operates with a direct current biasing, in which the DAPD is always on, and does not have “dead-time”. The output of a detected photon, or an ensemble of photons, is an electronic short pulse, with height that is proportional to the number of detected photons.


产品列表

Part NumberDescriptionImageData Sheet Link
DAPD 5×5+ PCB-1550-100

Discrete Amplification Photon Detector (DAPD0 5 by 5) Array with a pre-amplifier printed circuit board and temperature stabilization

Near infrared spectral response (950nm to 1650nm), high-speed self quenching 5 by 5 photon detector array, designed for 3D LIDAR applications.  Including a printed circuit board with 25 preamplifiers, a two-stage TEC and a thermistor.  One DC bias input is used for all 25 pixels, and each pixel is connected in parallel to an SMA high-speed connector.

image.png
DAPD 5×5-100

Discrete Amplification Photon Detector  (DAPD) 5 by 5 Array module with temperature stabilization; 950nm to 1650nm

Near infrared spectral response (950nm to 1650nm), high-speed self quenching 5 by 5 photon detector array, designed for 3D LIDAR applications.  Including a two-stage TEC and a thermistor.

image.png
DAPD-TO8

Near Infrared Discrete Amplification Photon Detector (DAPD) Thermoelectrically Cooled

Near infrared spectral response (950nm to 1650nm), high-speed self quenching photo detector, designed for a wide range of single photon detection applications. Photodetector packaged in a hermetically sealed TO-8 with a two-stage thermoelectric cooler and a thermistor for accurate temperature control.  Available optical aperture diameter: 200µm, 80µm

image.png
DAPD-TO39

Near Infrared Discrete Amplification Photon Detector (DAPD) TO-39

Near infrared spectral response (950nm to 1650nm), high-speed self quenching photo detector, designed for a wide range of single photon detection applications. Photodetector packaged in a hermetically sealed TO-39.  Available optical aperture diameter: 200µm, 80µm

image.png
DEM2-TO8

Device Evaluation Module 2

Discrete Amplification Photon Detector (DAPD) Device evaluation Module for TO8 package

The Evaluation module is a wide frequency range module designed for testing and evaluation of a thermoelectrically cooled DAPD packaged in a TO-8.  It consists of a low-noise package, bias filtering circuit, 4 SMA connectors (1) for the Thermo-Electric Cooler (TEC), (2) connection for the Thermistor, (3) DAPD Bias, and (4) RF analog output.

image.png
DEM1-TO39

Device Evaluation Module 1

Discrete Amplification Photon Detector (DAPD) Device evaluation Module for TO39 package

The Evaluation module is a wide frequency range module designed for testing and evaluation of a DAPD packaged in a TO-39.  It consists of a low-noise package, bias filtering circuit, 2 SMA connectors: (1) DAPD Bias, and (2) RF analog output.

image.png


分享到 :